TM 10-8340-243-13&P
0002
Plain Wall Liner. The plain wall liner (Figure 9, Item 1) is
constructed of a
lightweight, pajama check
weave cloth and is approximately 12 feet wide by 7 feet high. On the inside, eight quick release male
fasteners are located approximately 18 inches apart along the top edge. Seven buckle assemblies with
quick release female fasteners are located approximately 12 inches apart and 22 inches from the edge
along each side, with three more located approximately 5 feet apart and 12 inches above the bottom
edge. An identification label is sewn to the inside. In addition, seven side straps with quick release male
fasteners are located approximately 12 inches apart along the outer edge of each side. On the outside, a
2-inch strip of pile fastener is sewn along the upper seam of the liner. The plain wall liner provides
insulation and can be used as outside wall in hot weather during daylight hours. The liner also assists in
providing light discipline. One plain wall liner is issued with each Type I MCPS.
1