TM 10-8340-226-13&P
TABLE 3-1. OPERATOR TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. FSCT UNSTABLE
Step 1. Check frame assembly for proper setup, loose or missing hardware (1). Check that floor
to frame connectors (2) are installed in bottom of frame poles (3).
Adjust frame as necessary. Install floor to frame connectors in poles.
Tighten/replace loose/missing hardware.
Step 2. Check that cords (4) are properly adjusted. Check that hook and pile fasteners (5) are
properly adjusted. Check for missing/loose tent pins (6).
Adjust cords and hook and pile fasteners as necessary. Replace tent pins as
necessary.
3-2