ARMY TM 10-8340-224-13
AIR FORCE TO 35E5-6-1
Lay the modesty curtain (1) out flat inside the tent.
Straighten out all the cables (2,3) used for the modesty
Separate the hook and pile fastener of the liner at the
cave purlin height on both sides.
Place the horizontal cables (2) curved hook (4) through
the liner and around the cave purlin next to the frame on
Suspend curtain by locating each of the short cables (3)
with squared off hooks near the center of the cable.
Separate the hook and pile fastener above the cable (3) .
Insert the cable (3) through the liner and hang it on the
Close the liner around the modesty curtain cables (3) .
Locate the tie tapes (5) on each side of the modesty
Separate the liner next to the tie tapes (5) .
Tie the tie tapes (5) and secure hook and pile fasteners
to the frame and close the liner around th~ tabs.
When authorized, install partition as follows: