ARMY TM 10834022413
AIR FORCE TO 35E5-61
(d) Remove (cut) insulation tubing (9) from rear of
fuseholder (10) and remove wires from fuseholder
(e) Unscrew fuseholder cap (11) and remove fuseholder
(10) from switch bracket (12).
(2) Install Fuseholder.
(a) Place new fuseholder (10) into position through
switch bracket (12).
(b) Connect wires to fuseholder (10) terminals and
install insulation tubing (9) around terminals.
(c) Install cap (11) over fuseholder (10). (Install new
fuse if necessary.)
(d) Slide extrusion assembly (7) into lens/screen
(e) Install lampholder (4).
(f) Install male (1) and female (2) molded end caps on