ARMY TM 10834022413
AIR FORCE TO 35E5-6-1
TABLE 3-1. OPERATOR TROUBLESHOOTING (CONT)
TEST OR INSPECTION
2. LUMINAIRES DO NOT LIGHT.
Step 1. Check power source.
Ensure proper power source (11OV AC 50/60 HZ) is
Step 2. Check to make sure all electrical connectors are
Connect electrical connectors.
Step 3. Check for bad fuse.
Replace fuse if necessary as described in
Step 4. Check for burnt-out fluorescent lamp.
Replace lamp as described in paragraph
Refer to Direct Support Maintenance if still
unable to illuminate lamp.
Step 5. Check for proper operation of On/Off switch.
Refer to Direct Support Maintenance if switch does