MODERN BURNER UNIT (MBU)
Move to the left end of the support beam (3) and remove the second rubber grommet (8). Cut as before
and wrap around the cable.
Pass the connector end (9) of the cable up through the floor of the trailer and reinstall the grommet in the
floor of the trailer.
To replace a damaged Crossway Cable, remove the rubber grommets (6,8) at each end of the cable (1)
and pull the cable through the trailer floor at both ends.
Remove the rubber grommets and set aside.
Remove the cable clamps (2) mounted to the trailer support beam.
Remove the damaged cable.
Install as new cable as described above.
Installing 15ft MKT Crossway Cable
END OF WORK PACKAGE