LIGHTWEIGHT MULTIPURPOSE SHELTER (LMS)
REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INTRODUCTION
"Fabrication Instructions. Bulk materials required to manufacture items are listed in the bulk material functional
group of this RPSTL. Part numbers for bulk material are also referenced in the Description Column of the line
item entry for the item to be manufactured/fabricated . Detailed fabrication instructions for items source coded to
be manufactured or fabricated are found in TM 10-4510-207-14.
Index Numbers. Items that have the word BULK in the figure column will have an index number shown in the
item number column. This index number is a cross-reference between the NSN / P/N index work packages and
the bulk material list in the repair parts list work package."
"Associated Publications. The publication(s) listed below pertains to the Lightweight Multi-Purpose (LMS) Type 1
Operator's, Unit, And Direct Support Maintenance Manual For
Lightweight Multi-Purpose (LMS) Type 1 Shelter
HOW TO LOCATE REPAIR PARTS
1. When NSNs or P/Ns Are Not Known.
First. Using the table of contents, determine the assembly group to which the item belongs. This is necessary
since figures are prepared for assembly groups and subassembly groups, and lists are divided into the same
Second. Find the figure covering the functional group or the subfunctional group to which the item belongs.
Third. Identify the item on the figure and note the number(s).
Fourth. Look in the repair parts list work packages for the figure and item numbers. The NSNs and part numbers
are on the same line as the associated item numbers.
2. When NSN Is Known.
First. If you have the NSN, look in the STOCK NUMBER column of the NSN index work package. The NSN is
arranged in NIIN sequence. Note the figure and item number next to the NSN.
Second. Turn to the figure and locate the item number. Verify that the item is the one you are looking for.
3. When P/N Is Known.
First. If you have the P/N and not the NSN, look in the PART NUMBER column of the P/N index work package.
Identify the figure and item number.
Second. Look up the item on the figure in the applicable repair parts list work package.