REPAIR OF SHELTER PANEL PUNCTURE - DAMAGE TO CORE
THIS WORK PACKAGE COVERS:
General Mechanics Tool Kit (WP 0042, Table 2, Item 1)
Circular Saw (WP 0042, Table 2, Item 8)
Drill (WP 0042, Table 2, Item 4)
Oscillating Sander (WP 0042, Table 2, Item 7)
Riveting Tool (WP 0042, Table 2, Item 2)
Alcohol, Isopropyl (WP 0044, Table 1, Item 7)
Dome Head Pop-Rivets (WP 0044, Table 1, Items 27 & 28)
Polysulfide Sealer (WP 0044, Table 1, Item 2)
Commercial Body Filler (WP 0044, Table 1, Item 8)
between structural members. If the puncture or cut did not
seriously damage the honeycomb core, follow the
procedures in WP 0028. If the puncture or cut damaged the
honeycomb core, perform the following procedures.
1. Use a circular saw and make a cutout by removing approximately one
inch of skin around the outside of the puncture.
2. Select an aluminum patch that overlaps the cut out by one inch in all directions.