TM 10-5411-224-14
6-5.
PERSONNEL DOOR HINGE - continued.
WARNING
Alcohol solvents are flammable. Keep away from heat, sparks, and open flame. Keep containers closed when
not in use. Use only in well ventilated areas. Avoid prolonged breathing of vapors or repeated contact with
skin.
5.
Clean the area where the hinge (6) was secured using cotton cloth and isopropyl alcohol.
INSTALLATION
1.
Apply a thin uniform film of conductive sealer to shim (8) and hinge (6).
2.
Orient hinge (6) such that the wider section is aligned with the door and the narrow section is positioned for
attachment in the door jamb.
3.
Locate hinge (6) with shim (8) to door and secure using four rivets (7).
4.
Clean excess conductive sealer from hinge (6) using a cotton cloth and isopropyl alcohol.
5.
Apply a bead of sealer around perimeter of riveted section of hinge (6).
6.
Secure other member of hinge (6) to shelter with four screws (5).
7.
Locate end of door brace (4) to door stop bracket (3) and install pin of chain and pin assembly (2).
8.
Secure chain and pin assembly (2) in place using cotter pin (1).
6-4
