TM 10-5411-201-14
T.O. 35E4-178-1
3-5.
HINGED ROOF AREA CEILING LIGHT REPLACEMENT
This tasks covers:
a.
Removal
b.
Installation
WARNING
This fixture contains voltage that is dangerous
if contacted.
Before replacing hinged roof area
ceiling light, make sure- that electrical power is
completely disconnected from circuit involved.
REMOVAL
1.
Place ceiling light switch and circuit breaker CB6 to off position.
2.
Unplug cable connector (1) from receptacle outlet (twist-lock type
connector).
3.
Retract plunger (2) and slide hinged roof area ceiling light (3)
toward cable end to disengage two brackets (4) from four captive
studs (5) in hinged roof.
INSTALLATION
1.
Place hinged roof area ceiling light (3) against hinged roof with
holes in two brackets (4) over four captive studs (5).
2.
Slide light away from cable end to engage two brackets (4) on four
captive studs (5).
3.
Plug cable connector (1) in receptacle outlet.
3-6