TM 10-5411-201-14
T.O. 35E4-178-1
4-21. (cont)
1.
Drill out rivets (1) and remove bumper pad
(2). (Refer to paragraph 4-33)
2.
Remove rivets (3) and (4) and remove latch
(5) and latch pan (6). (Refer to paragraph 4-
33)
3.
Remove screws (7) and remove spacer (8).
NOTE
4.
Step 4 applies to left endwalls only.
Drill out rivets (9) and remove retainer strips
(10) and (11). (Refer to paragraph 4-33)
5.
Remove seal (12). (Refer to paragraph 4-41)
6.
Drill out rivets (13) and remove retainer strip
(14). (Refer to paragraph 4-41)
7.
Remove seal (15). (Refer to paragraph 4-33)
8. Remove velcro strap (16).
9. Drill out rivets (17) and remove retainer strip
(18). (Refer to paragraph 4-33)
4-92 CHANGE 6