TM 10-5411-201-14
T.O. 35E4-178-1
4-17.
(cont)
10.
Drive out dowel pins (25 and 26) and remove inside handle (27),
latch arm (28), washer (29), pin (30) and bottom rod (31).
11.
Repeat steps 7 through 10 to remove lower latch arm.
12.
Drive out dowel pin (39) and remove
outside handle (40) and washers
(41).
13.
Drill out rivets (42) and remove pan (43).
(Refer to 4-33).
14.
Remove flanged bearings (44) and shafts (45 and 46).
15.
Drill out rivet (47) and remove washer (48) and spacers (49).
16.
Drive out dowel pins (50) and remove rollers (51) and roller
extensions (52).
Door Stop Assembly
17.
Remove six bolts (53 and 54),
lockwashers (55), and washers (56).
18.
Remove door stop assembly (57) from door.
4-58