TM 10-5411-201-14
T.O. 35E4-178-1
4-10.
(cont)
4.
Remove screw (5) and separate light fixture (4) from light fixture
adapter (6) as far as it will go.
5.
Using multimeter, check for continuity at bulb socket and wiring.
6.
If no continuity Is present,
replace defective light fixture or
wiring.
REMOVAL
1.
Remove two screws (1) and switch cover (2).
2.
Remove two screws (3) and pull switch (4) from outlet box (27) as
far as it will go.
3.
Disconnect wires at rear of switch (4).
NOTE
Tag wires for reconnection.
4.
Remove two screws (5) and light fixture cover (6).
Remove bulb
(29).
5.
Remove screw (7) and separate light fixture (8) from light fixture
adapter (9) as far as it will go.
4-22