TM 10-5411-200-14
T.O. 35E4-177-1
3-8.
SIDEWALL CLOSEOUT, ECU INTAKE, AND ECU RETURN PANELS REPLACEMENT
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Standard Tools
General mechanics tool kit
Personnel - 2
REMOVAL
1.
If environmental control unit (ECU) panels are installed and ECU is
operating, shut down ECU.
(Refer to appropriate shelter system
manual.)
2.
Disconnect ECU ducts.
(Refer to appropriate shelter system manual.)
Sidewall Closeout Panels
3.
Inside shelter, loosen four captive screws (1) and remove small
sidewall closeout panel (2).
4.
Inside shelter, loosen twelve captive screws (3) and remove large
sidewall closeout panel (4).
3-9