TM 10-5411-200-14
T.O. 35E4-177-1
2-14.
(cont)
b.
Remove bulb from equipment container and screw bulb into light
socket.
c.
Install the area light on the fixed personnel or cargo endwall by
mating the headed end of the mounting screws
with the brackets provided.
d.
Secure the area light to the mounting brackets by tightening the two
wingnuts.
NOTE
When the area light is installed at cargo end of
shelter the cable is routed over the top of the
shelter.
The excess cable slack should be neatly
coiled on the area light post so that it does not
present a hazard to personnel.
e.
Connect cable into J3 or J4 connectors on the power entry panel.
2-15.
EXTERNAL CONNECTIONS.
2-28