TM 10-5411-200-14
T.O. 35E4-177-1
4-40.
SHELTER BODY SEALS REPLACEMENT.
W A R N I N G
Wear safety goggles for eye protection from flying metal chips.
a.
If defective seal has a retaining strip, drill out blind rivets and
remove retaining strip.
(Refer to paragraph 4-32.)
b.
Remove defective seal and strip old sealant from bonding surface.
WARNING
Methylethylketone is flammable and toxic and shall be
used only in a well-ventilated area away from all sparks
or open flame.
c.
Sand using sandpaper (Item 17, Appendix E) only if required to
remove material not taken off in preceding step.
d.
Wipe bonding surface with a clean cloth (Item 5, Appendix E)
dampened with solvent (Item 20,
Appendix E) and immediately wipe solvent from
surface with a clean, dry cloth.
4-174