TM 10-5411-200-14
T.O. 35E4-177-1
4-19.
(cont)
3.
4.
5.
6.
7.
8.
9.
10.
Remove grease fitting (7).
Remove rivet (8) to remove
lanyard (9) and safety pin (10).
NOTE
Do not remove lanyard unless pins
or cables are damaged.
Remove screws (11) and spring
tension clip (12).
Remove cotter pin (13), washer
(14), pin (15), and spacers
(16) to remove base (17) from
basic jack.
Remove inside tube (18) and
jack screw (19) from outside
tube (20).
Remove bearing (21).
Drive pin (22) out through
access hole and remove jack
screw (19) from inside tube
(18)
Remove
(5) .
Jack Extension
11.
Remove
O-rings (29) from handle
quick-disconnect pins
(23) and remove inside tube
(24) from outside tube (25).
12.
Remove screw (27), washer
(28), and lanyard (26).
NOTE
Do not remove lanyards unless pins or cables are
damaged.
4-79