TM 10-5411-200-14
T.O. 35E4-177-1
4-17.
(cont)
4.
Position lanyard (42) on bracket (40) and install rivet (41).
(Refer to paragraph 4-32)
5.
Insert pin (39) through lower brace (54) and bracket (40) and
install hair pin (38).
6.
Refinish (paragraph 4-43)
Door Vent
7.
Position spring (35) and install washers (34) and bolts (33).
8.
Assemble curtain (32), retainer strips (31), and door vent (30) and
install rivets (29).
(Refer to paragraph 4-32)
9.
Position hinge (28) and install rivets (27),
(Refer to paragraph 4-32)
10.
Position fastener (26) and install rivet (25).
(Refer to paragraph 4-32)
11.
Assemble vent frame (24), filter (23), and filter frame (22) and
install washers (21), lockwashers (20), and screws (19).
12.
Apply sealing compound to rear of caution plate (37), place against
door vent (30) and install rivets (36).
(Refer to paragraph 4-32)
4-63