TM 10-5411-200-14
T.O. 35E4-177-1
4-1.7.
(cont)
9.
Remove nuts (19), washers (20 and 21), latch arms (22), spacers
(23), and pins (24).
10.
Drive out dowel pins (25 and
latch arm (28), washer (29),
11.
Repeat steps 7 through 10 to
12.
Drive out dowel pin (39) and
(41).
26) and remove inside handle (27),
pin (30) and bottom rod (31).
remove lower latch arm.
remove outside handle (40) and washers
13.
Drill out rivets (42) and remove pan (43).
(Refer to paragraph 4-32)
14.
Remove flanged bearings (44) and shafts (45 and 46).
15.
Drill out rivet (47) and remove washer (48) and spacers (49).
16.
Drive out dowel pins (50) and remove rollers (51) and roller
extensions (52).
Door Stop Assembly
17.
Remove six bolts (53 and 54), lockwashers (55), and washers (56).
18.
Remove door stop assembly (57) from door.
4-58