TM 10-5410-229-13&P
2-6. ASSEMBLY AND INSTALLATION INSTRUCTIONS - Contd
NOTE
Walls and liners must be removed from sides to be complexed. If liners
are to be reinstalled, secure with hook and pile fasteners only.
Window/entrance wall liners will allow passage or privacy as desired.
(1)
Attach one side of the rain gutter (1) to the inside of the roof cap (2) of one of the connecting tents with the
quick disconnect (3) and hook and pile fasteners (4).
(2)
Fold the dangling gutter edge up and into the other connected MCPS and attach the quick disconnect (2) and
hook and pile fasteners (4) to the roof cap (2). The gutter (1) now forms a channel, or rain gutter, between
the two MCPS.
(3)
To achieve a tight weather and blackout seal between the rain gutter (1) and the MCPS, pull the rain gutter
flaps through the notches cut out of the wall assemblies (5) at each corner.
2-32