G-2. OPERATING INSTRUCTIONS - Contd
(a) Center the rear of the M577 on the MCPS bootwall and position it 4 to 5 away from the MCPS.
If a wall assembly is already in place on the side of the MCPS that will be attached to the M577, it must be removed
as follows: (1) Release all quick disconnect
(1). and hook and pile (2) fasteners at inside and outside corners.
Remove wall (3) by releasing all quick disconnect (1) and hook and pile fasteners (2) Fold the wall (3) with
identification label visible and place in fabric transport bag.