REPAIR LIGHT SET - Contd
Solder wires to fuseholder (13) terminals. and apply insulation around terminals.
Install cap (14) over fuseholder (13). (Install new fuse if necessary.)
Slide extrusion assembly (6) into luminaire (3).
Install lampholder (4).
Install male (1) and female (2) molded end caps on luminaire (3).
Remove and Install Handles, Hinges and Latches.
Remove Handles, Hinges, and Latches.
Remove a handle, hinge or latch from the storage container by removing the rivets as described in paragraph
Install Handles, Hinges, and Latches.
Align new handle, hinge or. latch with holes in case and install rivets as described in paragraph 5-6.