TM 10-5410-221-24
Figure 1-5. Power output panel assembly.
along the duct for use in positioning and securing the
separated by a layer of foam. Each layer of the dacron
duct.
fabric is coated with hypalon on the outside surface. The
g. Leveling Jacks. Manually operated, adjustable
bellows includes an adjustable nonskid tread plate which
serves as a walkway between connected shelters.
screw type jacks are provided on the shelter center
i.
Repair Kit. The expandable shelter repair kit
section and folding floor panel assemblies to allow for
consists of assorted sizes of seal rubber, hand riveter,
vertical adjustment to compensate for irregular terrain.
h. Bellows.
Bellows are provided with each
nose piece, rivets, foam paper core, phenolic, flooring,
facing, and
shelter to interconnect two shelters. The bellows is
fabricated of two neoprene coated dacron layers
1-7