TM 10-5410-221-14/1
1.
Incandescent lamp
7. Screw
13.
Screw
18.
Connector
2.
Screw (4)
8. Junction box cover
14.
Washer
19.
Bushing
3.
Washer (4)
9. Receptacle gasket
15.
Bracket
20.
Junction box
4.
Air lock light guard
10. Screw
16.
Terminal
21.
Connector
5.
Screw (2)
11. Washer
17.
Terminals
22.
Cable
6.
Washer
12. Socket
1. Screw (1)
3. Screw (2)
5. Jumper wire
2. Cover plate
4. Convenience receptacle
Figure 6-24. Electrical Convenience Receptacles, Disassembly (TS 013309)
Section IV. POWER DISTRIBUTION BOX ASSEMBLY REPAIR INSTRUCTIONS
6-20. General
NOTE
Tag or otherwise identify all electrical
leads as to connection point as soon as
This section contains the power distribution box
removed for aid at assembly.
All
assembly used for the distribution and control of
electrical power within the shelter. The distribution box
should be accomplished according to
assembly consists of nine wiring harness assemblies,
Specification MIIS-6872 using Sn60
seven wire and terminal assemblies, nineteen circuit
solder which conforms to Specification
QQ-S-571.
emergency light and six terminal boards enclosed in a
metal distribution box assembly.
6-21. 60 Hertz Wiring Harness Assembly
a. General. The 60 Hertz wiring harness provides
60 Hertz power between terminal board
6-33