Figure 4-9. Installation of Bellows Section and Tread Plates (Sheet 2 of 2) (TS 013749)
Section II. MOVEMENT TO A NEW WORK SITE
b. Draining and Purging of Water System. Drain and
4-4. Dismantling for Movement
purge the water system as follows:
In general, the procedures for dis-
(1) Remove the supply hose from the water supply
mantling the expandable shelter are the reverse of those
used for erection.
If required for clarification of
(2) Flow hot water and cold water into the closet
procedures or for identification of components, reference
shelter until the utility element water supply is depleted.
should be made to applicable erection (fig. 4-6, sheets 1
(3) Shut off the water pumps in the utility element.
thru 36). All accessory equipment, furniture, or other
(4) Disconnect the hot water recirculating hose at
items installed in the shelter during use shall be removed
the valve shutoff on the utility element.
or positioned in center section and all external utility
services shall be off or disconnected prior to dismantling