TB 9-2320-360-13&P-2
WINDSHIELD BALLISTIC GLASS AND WINDSHIELD ARMOR REPLACEMENT - CONTINUED
0017 00
INSTALLATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Failure to follow this warning may cause injury or death.
For proper threat protection, ballistic glass must be correctly installed onto frame. During installation,
ensure that decal marking "INSTALL THIS SURFACE TOWARDS THREAT" is located on outside of
cab. Improperly installed windshield armor will not protect occupants. Failure to follow this warning
may cause injury or death to personnel.
NOTE
Windshield ballistic glass weighs 113 lb (51 kg).
Slide ballistic glass towards roof then down into lower windshield bracket (13).
13.
With assistance, position windshield ballistic glass (15) in lower windshield bracket (13), with INSTALL THIS SUR-
FACE TOWARDS THREAT decal facing outward.
14.
Install windshield brackets (6, 9, and 10) on windshield frame.
15.
Install 16 washers (11), bolts (12), washers (8), and new locknuts (9). Tighten locknuts to 108 lb-in. (12 Nm).
8
7
9
11
10
12
6
15
14
13
417-093
0017 00-12