Installation Manual P/N 0257550622-00
Freightliner M915 / M916 -
(Doc No.: II113500-1 D)
Crew Protection Kit
This document provides the Installation Instructions for the Crew Protection Kit for the M915-A3,
M915-A2, and M916-A1 vehicles. This kit is composed of various armor panels that can be easily
attached and detached from the vehicle and stored when not required.
This kit (113500-1) provides the M915-A3, M915-A2, and M916-A1 vehicles with improved
protection against mine blasts, improvised explosive devices (IEDs), light artillery fragments, and
small-arms fire. The M915-A2 and the M916-A1 require the Adaptation Kit, 113502-1.
Crating may vary depending on the point of origin. Typically, each crate is contained in multiple
containers. These containers provide the kit contents with protection and security when they are
not installed on the vehicle. Note: The crates are not designed for outside storage. Several of the
components within the kit require the at least two people to safely lift. Some of the components
within the kit require the use of lifting equipment (hoist, forklift, etc.)
1.3 LIST OF ACRONYMS AND ABBREVIATIONS
LH: Left Hand
P/N: Part Number
RH: Right Hand
1.4 SPECIAL TOOLS AND EQUIPMENT
Special Tools: None.
1.6 SAFETY PRECAUTIONS, WARNINGS AND NOTES
The following notes included in this manual to provide a short, concise and readily visible emphasis.
Explanations of each are provided in the examples provided below. Always observe standard safety
precautions during installation, operation, and maintenance of this product.
An operating procedure, practice, and so forth, which, if not correctly
followed, could result in personnel injury or loss of life.
An operating procedure, practice, and so forth, which if not strictly
observed, could result in personnel injury or damage to, or destruction