TB 9-2320-302-13&P-1
A-PILLAR ARMOR REPLACEMENT - CONTINUED
0022 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury to personnel.
NOTE
A-pillar armor weighs 93 lb (42 kg) estimated.
4.
With assistance, remove six bolts (6), washers (7), A-pillar overlap (3), and A-pillar armor (8) from vehicle.
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury to personnel.
NOTE
A-pillar armor weighs 93 lb (42 kg) estimated.
1.
With assistance, install A-pillar armor (8), A-pillar overlap (3), six washers (7), and bolts (6) on vehicle.
2.
Install washer (12), bushing (11), bolt (13), washer (10), and nut (9) on A-pillar armor (8).
3.
Install two washers (4) and bolts (5) on bottom of A-pillar overlap (3).
4.
Install nine washers (2) and bolts (1) on A-pillar overlap (3).
5.
6.
END OF WORK PACKAGE
0022 00-3/(0022 00-4 Blank)