CAB SUPPORT REINFORCEMENT REPLACEMENT - CONTINUED
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
Use lifting device to raise rear of cab enough to
remove weight from cab support reinforcement (2).
After air pressure has been bled, disconnect air line (1)
from rear end of air tank located under left side of the
Remove two bolts (6), washers (5), clamp bars (4),
and cab support reinforcement (2) from vehicle.
Remove two rubber insulators (3) from vehicle frame.