OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
Not Fully Mission
Front Armor a. Inspect front and cowl armor panels Any panel or armor plate is damaged,
for damage or loose or missing bent out of shape, misaligned, loose or
missing, or mounting bolts are loose or
b. Inspect front and cowl armor panels Any corrosion where area is unsound
for areas of rust or corrosion.
and small pin holes are present, or a
rusted through condition is present.
c. Inspect front and cowl armor panels Any cracks that are longer than 1" or
for cracks near or elongation of bolt two consecutive bolt holes that are elon-
d. Inspect front and cowl armor panels Any complete penetration of the armor
for any holes or gouges.
(hole in the armor) or multiple gouges
1/4" or deeper within 3" of each other.
e. Inspect windshield ballistic glass Any ballistic glass mounting hardware
mounting hardware for damage, is damaged, loose, or missing, or
loose, or missing mounting hardware. mounting bolts are loose or missing.
Rock chips, cracks with spider webbing,
f. Inspect exterior surface of wind-
scratches, pitting, or hits in the exterior
shield ballistic glass for rock chips,
layer of ballistic glass that expose glass
cracks, scratches, pitting, any hits that
below the first layer, cloudiness that
expose glass below the first layer,
cloudiness, or any stickers that impair
g. If dirty, clean windshield ballistic