OPERATION UNDER UNUSUAL CONDITIONS - CONTINUED
ESCAPE HATCH OPERATION - CONTINUED
Clips on rear window grate are of break-away type. It may be necessary to install new clips when grate is
pushed open from inside cab.
Remove rear window grate (5) by pushing outward to release clips (4).
Exit vehicle through rear window.
OPERATION IN EXTREME TEMPERATURES
Operation in extreme temperatures with a Crew Protection Kit installed requires altering operating procedures.
Never use scraper to remove frost or ice from ballistic glass. Failure to follow this caution will damage outer layer.
Clearing frost from ballistic glass requires more time than standard glass.
Extend vehicle warm-up time and operate heater and defroster to clear frost from ballistic glass as in Operator Technical
Manual for specific vehicle. Refer to References (WP 0031 00) for more information on sited reference.
The Crew Protection Kit absorbs and retains more heat than a standard cab.
Park vehicle away from direct sunlight whenever possible.
Operate air conditioner to cool down interior of cab as in Operator Technical Manual for specific vehicle. Refer to Ref-
erences (WP 0031 00) for more information
on sited reference.
END OF WORK PACKAGE